Set Up Sos Report Interval - Sanav MU-201 User Manual

4.6.2 Set up SOS Report Interval

Use this SMS message to predefine the SOS report interval by following the format below.
Setup format: #「username」,「Password」,「Function Code」,「SOS report interval」,「SOS report times」*
Example：＃username,0000,15,30,3*
Note that SOS report interval ranges from 1~65000 seconds; SOS report times ranges from 1~9999 times.
The table 4.6.2.2 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
15
30
3
*
Table 4.6.2.2
The table 4.6.2.3 shows each confirmation message reply after setup
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Function Code
It defines the report interval (in this case, one report per 30s) when SOS is triggered.
It defines how many times the SOS report will be sent to the defined SOS phone number.
(in this case, 3 times)
End sign.
Message Reply
setup OK. Device Panic report setting is updated.-15-Panic Report Setting,3.950V
in emergency, Panic Report setting is not allowed.-15-Panic Report Setting
,4.000V
16