Setup Geofence Alarm Report Interval - Sanav MU-201 User Manual

4.13 Setup Geofence Alarm Report Interval

Users can use this command to define the Geofence Report Interval and times.
Setup format：#「username」,「Password」,「Function mode」, 「Seconds」,「times」*
Example:
Command: #username,0000,17,0~30000,0~9999*
The table 4.13.1 describes the meaning of each segment in the message above
Text Keyed In SMS
#
username
0000
17
0~65000
0~9999
*
The table 4.13.2 shows each confirmation message reply after setup
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 17 defines to set the geofence report interval
Time interval in second
Total report. Note that 9999 means infinite reporting.
End sign.
Table 4.13.1 The explanation of each segment of command
Message Reply
GTS setting is updated.,3.836V
in emergency, Geofence Report setting is not allowed.-17-Geo Setting,4.000V
24