4.2 Change Password
Use this SMS message example seen below to change the password of MU-201. For example, by following the example
below, you will change the default password, "0000" to a new password, "1111".
Setup format:#「username」,「Password」,「Function Code」,「new Password」,「new Password」*
Example:#username,0000,2,1111,1111*
The table 2.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
2
1111
1111
*
The table 4.2.2 shows each confirmation message reply after setup
Situation
Setup Succeeds
Setup Fail
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 2 defines to change the password
New password (Please note at the maximum of 4 number)
Reconfirm the password
End sign.
Message Reply
Device Password is updated.,4.020V
Password setup Fail!,3.914V
in emergency, changing password is not allowed.,3.945V
Table 4.2.2
Table 4.2.1
10