Set Up Sos Number - Sanav MU-201 User Manual

4.6 Set up SOS Number

Use this SMS message to predefine the SOS cellular numbers by following the format below. MU-201 will first send a SOS
Alert to the SOS phone and then make a phone call to the SOS phone number immediately.
Setup format: #「username」,「Password」,「Function Code」,「SOS Phone」*
Example：＃username,0000,sosphone,+886123456789*
Note that both adding and not adding the "+ "sign in front of the cellular phone number(s) are both acceptable,
while the"+" sign should precede the national code.
The table 4.6.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
username
0000
sosphone
+886123456789
*
The table 4.6.2 shows each confirmation message reply after setup
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode "sosphone" defines the changes of the built-in phone number list.
SOS Phone number
End sign.
Message Reply
Device sos phone book is updated.SOS phone=0955123456,4.016VV
in emergency, sos phone book setup is not allowed.,3.920V
Table 4.6.1
14