Setup Voice Mode - Sanav MU-201 User Manual

4.14 Setup Voice Mode

Users can use this command to define the Voice Mode of MU-201.
Voice Mode is to define how MU-201 will action when receiving an incoming call.
Please note that have if you have enabled "Security Phone Book" function, then MU-201 will verify whether the caller's
number is in the Security Phone Book. If it's not, then MU-201 will not react to the incoming call.
Setup format：#「username」,「Password」,「Function mode」, 「0~3」*
Example:
Command: #username,0000,8,0~3*
The table 4.14.1 describes the meaning of each segment in the message above
Text Keyed In SMS
#
username
0000
8
0~3
*
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Mode 8 defines to set the Voice Mode.
0 and 1: MU-201 will Auto-answer the call and go into Voice Monitoring Mode.
2: MU-201 will hang up the call and respond its current location to the caller's cell number.
3: MU-201 will hang up the call and respond its current location to the defined Router.
End sign.
Table 4.14.1 The explanation of each segment of command
The table 4.14.2 shows each confirmation message reply after setup
Message Reply
Device is switching to MIC mode.-08- Monitor Modevoice mode 0, auto answer the
call,3.944V
Device is switching to MIC mode.-08- Monitor Modevoice mode 2, reply the polling
SMS to caller,3.930V
Device is switching to MIC mode.-08- Monitor Modevoice mode 3, reply the polling
SMS to phone1,3.914V
in emergency, Voice setting mode is not allowed.-08- Monitor Mode,3.958V
25