Table of Contents
Advertisement
4.1 Change Username
You can change the ID of MU-201 by following the format below. No space is allowed between the characters. For example,
if you send the SMS message shown in the example below to the MU-201, you will change the ID from "username" to "car"
Setup format： #「username」,「Password」,「Function Code」,「New username」*
Example：#username,0000,1,car*
The table 4.1.1 describes the meaning of each segment in the message above.
Text Keyed In SMS
#
Username
0000
1
Car
*
The table 1.2 shows each confirmation message reply after setup
Situation
Setup Succeeds
Setup Fail
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201
Default password.
If you have changed the password, please use the updated one.
Mode 1 defines the ID setup
New ID defined by the owner.
At the maximum of 16 characters, including a~z,A~Z,0~9, @ - _ / .!%&
End sign.
Message Reply
Device username is updated.,4.032V
Username setup Fail!-01- Username is empty or length is too long!,3.926V
in emergency, changing username is not allowed.,3.972V
Table 4.1.1
Table 4.1.2
9
Advertisement
Table of Contents
