Set Up Sos Alarm Report Interval - Sanav GS-818 User Manual

Set up SOS Alarm Report Interval

User can use this SMS command to define the SOS alarm report interval and times by following the format below.
Setup format: #「User Name」,「Password」,「Function Code」,「SOS alarm report interval」,「SOS alarm report times」
*
Command: #username,0000,15,60,3*
Note that SOS alarm report interval ranges from 1~65000 seconds; SOS alarm report times ranges from 1~9999
times.9999 times means infinite.
The default value for SOS alarm report interval ranges is 60 seconds and 3 times.
SMS Text
#
username
0000
15
60
3
*
Situation
Setup Succeeds
Emergency Mode
46
GS-818 GPS/GSM/GPRS Vehicle Tracker User Manual
Description
Start sign.
 Default user name of the device.
 If you have changed the username, please use the updated one.
 Default password.
 If you have changed the password, please use the updated one.
Function Code
It defines the report interval setup (in this case, one report per 60s)
It defines how many times the SOS alarm report will be sent to the defined Server.
(in this case, 3 times)
End sign.
Table: SOS Alarm Report Interval Setup Format Description
Response
username, setup OK. Device Panic report setting is updated.
Username, in emergency, setup stop.
Table: SOS Alarm Report Interval Setup Response Description
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.