Connect Power Connector; Connect Grounding Cable; Figure 4-14: Connect Power Cable; Figure 4-15: Connect Power Adaptor To Grounding - Baicells Nova-243 eNodeB Installation Manual

4.7 Connect Power Connector

Connect the 48V DC power connector to the PWR interface on the eNB, as shown in Figure 4-
14 (red cable).

Figure 4-14: Connect Power Cable

4.8 Connect Grounding Cable

At the installation site, you will connect the power adaptor grounding terminal to the
grounding bar, as shown in Figure 4-15.

Figure 4-15: Connect Power Adaptor to Grounding

27