Table of Contents
Advertisement
Installation
4
Some cell site structures may have existing frameworks for attaching the base station and
antenna. For purposes of explaining the installation procedure, this section assumes the base
station will be installed on a support pole or on a wall.
4.1 Process Overview
Figure 4-1 provides an overview of the installation process.
Figure 4-1: Installation Process Overview
4.2 Install Base Station on Pole or Wall
4.2.1 Install on Pole
Check to ensure the diameter of the pole is in the range of 1.6-3.9 inches (40-100 mm). Follow
the steps below to install the base station on a pole.
1. Assemble the mounting bracket, and attach and fasten the screws (Figure 4-2).
Figure 4-2: Mounting Bracket
14
Advertisement
Table of Contents
