Type 2 - With Chthd1 (R1-R7) /Thchd1 (R1) T-Harness - Directed DBALL2 Installation Manual

Platform: DBALL2
Firmware: CHRYSLER Remote Start Ready (RSR) Installation
Installation Type 2 - with CHTHD1 (R1-R7) /THCHD1 (R1) T-Harness
Refer to the Vehicle Wiring Reference Charts for wire color and location.
(MUX) Parking Lights: Pin 3
6
5
4
3
2
1
Headlight switch
(black 6-pin conn.)
Ignition
Barrel
All connectors are displayed from the wire side (unless specified otherwise).
(MUX) Parking Lights Output: Violet/Green: 8
(MUX) Parking Lights Output: Violet/Brown: 9
(-) RAP Off Output: Yellow/Black: 10
(-) Driver Door
Trigger: Violet
CHTHD1 (R1-R7)
/ THCHD1 (R1)
(optional)
12-pin Connector
(harness side)
RF
Prog. Button
LED
You can connect to either a XL202
Driver
RFTD OR a SmartStart module.
Kick
Refer to the SmartStart/XL202
Panel
Installation Notes for more information.
12-pin Connector
12-pin Connector
(harness side)
Hood Pin
Remote Start Safety
Override Switch
6: White/Black: (-) Hood Input
(+) 12V
RX
DBALL2
(-) Ground
TX
(Vehicle side)
© 2017 Directed. All rights reserved.
Rev.: 20170214
Page 6