Directed DBALL2 Installation Manual

Directed DBALL2 Installation Manual

Firmware g 9 : m v.2.0 +
Hide thumbs Also See for DBALL2:

Advertisement

Quick Links

Platform: DBALL2
Firmware G 9
:
M
v.2.0 +
Update Alert: Firmware updates are posted
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
The
GM
9 firmware for
DBALL
specific Buick, Cadillac, Chevrolet and GMC vehicles.
This module can only be flashed and configured using Xpress
using the Directechs Mobile application for smartphones. Refer to
section
on page
11
for more information.
Key2
GO
is required.
Important!
▪ This guide is compatible with the
Index
.................................
& 1
..............
................................
Installation
(Wiring Diagram & Vehicle Wiring Reference Chart )
Type 1..............
..........................................................................
Type ..............
2
..........................................................................
Type 3.................................................................................................................................................................................
Programming
.......................................................................
.......................................................................
Module Reset.. ................................................................................................................................................................
...
Reset.. ................................................................................................................................................................
...
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Quick Reference Guide......................................................................................................................................................
®
Buick, Cadillac
, Chevrolet and GMC
are registered trademarks and property of
6
2 is an all-in-one door lock and override module compatible with
GM
9 firmware version 2.0 and later.
.......
...............................
.......
...............................
s
Warranty.......................................................................................................................
on
the web on a regular basis. We recommend
VIP
at www.directechs.com or
the Module Programming
6
..................
..................
s
.....
..........................................
.....
..........................................
......................
......................
their respective companies
.
......................................................
......................................................
..........................................
..........................................
..........
.......
...........................................
..........
.......
...........................................
© 2017 Directed. All rights reserved.
Rev.: 20
17
08
28
....
02
....
03
04
07
09
11
13
14
....
14
15
16
17
........
19
20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DBALL2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Directed DBALL2

  • Page 1: Table Of Contents

    Feature & Option List................................Feature Programming................................. LED Diagnostics & Troubleshooting........................... Limited One-Year Consumer Warranty..........................Quick Reference Guide..............................® Buick, Cadillac , Chevrolet and GMC are registered trademarks and property of their respective companies © 2017 Directed. All rights reserved.
  • Page 2: Vehicle Application Guide

    PK: Transponder & Immobilizer Override •: D2D & Wire-to-Wire (W2W) DL: OE Door Lock & Alarm Controls FOB: Sync CAN Interface w/ FOB Remote RS: Engine Start & Status SS: Entry Point Status-Security ST: Function/Feature Status © 2017 Directed. All rights reserved.
  • Page 3: Key2 Go & 1 Key

    Any first-time user must re-register to gain access to Key2 , and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2 is compatible with Xpress 4.5 or higher and requires an...
  • Page 4 Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Required ONLY for manual transmission vehicles. Cadillac SRX ONLY With the exception of the OBDII Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 5 Blue BCM passenger side center console. HS CAN Low White Data Blue BCM passenger side center console. Brake Blue/Yellow Blue BCM passenger side center console. Red/Brown Blue Clutch Output [3] Yellow Clutch switch. Black © 2017 Directed. All rights reserved.
  • Page 6 Blue HS CAN High Blue Data BCM under drivers dash. Blue HS CAN Low White Data BCM under drivers dash. Blue Brake Blue BCM under drivers dash. Blue Red/Violet BCM under drivers dash. Blue © 2017 Directed. All rights reserved.
  • Page 7 Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Required ONLY for manual transmission vehicles. With the exception of the OBDII Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 8: Type 1

    BCM under driver dash. White HS CAN Low White Data BCM under driver dash. White SW CAN Green Data BCM under driver dash. Gray Brake White/Green BCM under driver dash. Blue Red/Violet BCM under driver dash. Blue © 2017 Directed. All rights reserved.
  • Page 9 Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. With the exception of the OBDII Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 10: Type 3

    HS CAN Low White Data BCM passenger side center console. White SW CAN Green Data BCM passenger side center console. Blue Brake Blue/Yellow BCM passenger side center console. Blue Red/Brown BCM passenger side center console. Blue © 2017 Directed. All rights reserved.
  • Page 11: Module Programming

    Press the Push-to-Start button once to turn the ignition OFF. The LED ENGINE & PUSH START continues to flash orange slowly. Flashes STOP Orange Slowly Go to the next page t complete the module programming. © 2017 Directed. All rights reserved.
  • Page 12 Request Once the configuration is completed, r econnect the module. & The LED turns ON solid green for 3 seconds, then turns off Solid x3 Secs You have successfully completed the module programming sequence. © 2017 Directed. All rights reserved.
  • Page 13: Keyport Location

    Open the center console and place the transmitter in the transmitter pocket GMC Yukon 2015 - 2016 with the buttons facing the front of the vehicle. © 2017 Directed. All rights reserved.
  • Page 14: Module Reset

    Wait 3 seconds until the LED turns solid orange , and w 10 more seconds & until the LED starts to flash orange red. Solid Flashes & Release the programming button. The turns solid red. Release Solid © 2017 Directed. All rights reserved.
  • Page 15: Feature & Option List

    2. Electric Rear Hatch* When available, w ill operate the electric rear hatch. The OEM alarm w ill not be controlled by DBALL2 upon remote start. No disarm or arm command w ill be executed at the 1. Disabled beginning or end of the sequence; it must be controlled by the Remote Starter.
  • Page 16: Feature Programming

    2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the will turn orange for 2 seconds to confirm the end of the programming sequence. © 2017 Directed. All rights reserved.
  • Page 17: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2017 Directed. All rights reserved.
  • Page 18 The smart key was not detected, which prevents the Flashes red Smart key was not detected. system from shutting down the vehicle. The vehicle was detected as moving, which prevents the Flashes red Speed was detected. system from shutting it down. © 2017 Directed. All rights reserved.
  • Page 19: Limited One-Year Consumer Warranty

    CLAIM OR DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER ’S...
  • Page 20: Quick Reference Guide

    Nothing to do but put the gear in drive and enjoy your vehicle. This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securily. © 2017 Directed. All rights reserved.
  • Page 21 3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2017 Directed. All rights reserved.

Table of Contents