Directed Xpresskit DBALL2 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Remote Starter
  5. Xpresskit DBALL2
  6. Installation manual

Directed Xpresskit DBALL2 Installation Manual

Remote start ready (rsr)
Hide thumbs Also See for Xpresskit DBALL2:
Table of Contents

Advertisement

Quick Links

Download this manual
Platform: DBALL2
Firmware FORD3 emote Start
:
R
Update Alert: Firmware updates are posted to the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
The FORD3 firmware for
DBALL
specific Ford and Lincoln vehicles. This guide supports the installation of a
Ready (
RSR
) mode.This solution offers three (3) configuration options to control your system: 3x
OEM
Lock Remote Start Activation,
This module can only be flashed and configured using Xpress
Mobile application for smartphones. Refer to
Remote Start Ready (
completely on its own. Consequently, there is no need for an aftermarket or an
start the vehicle from a distance.
Important!
This product is
NOT
Key2
GO
is required.
Index
.......................................................................
...........................................................................................................................................................................
Type 1..............................................................................................................................................................................
Type 2..............................................................................................................................................................................
Programming
Module Programming......................................................................................................................................................
Module Programming: Key2Go.......................................................................................................................................
.......................................................................................................................
Feature Programming......................................................................................................................................................
&
Troubleshooting................................................................................................................
...............................................................................................................................................................
Limited One-Year Consumer Warranty............................................................................................................................
Quick Reference Guide...................................................................................................................................................
SmartStart is equipped with D2D which means it can be connected to an interface module and used in
Start Ready (
RSR
information.
® For and Lincoln
d
are registered trademarks and property of
Ready (R
2 is an all-in-one door lock and override module compatible with
RF
System or SmartStart (all sold separately).
the Module Programming section
RSR
) is a function that enables the interface module to remote start the vehicle
compatible with vehicles equipped with a manual transmission.
..............................................................................................................................................
.
,
) mode
without
the use of
their respective companies
SR Installation
)
DBALL
VIP
at www.directechs.com or using the Directechs
..................
a remote starter.
See the
.
2 in Remote Start
for more information.
OEM
remote starter in order to
.......................................................
..............................
...............................
................
Module Programming
section for more
© 2017 Directed. All rights reserved.
Rev.: 20170908
02
03
04
07
09
10
11
....
12
13
13
14
16
17
18
Remote

Advertisement

Table of Contents
loading

Related Manuals for Directed Xpresskit DBALL2

Summary of Contents for Directed Xpresskit DBALL2

  • Page 1: Table Of Contents

    Remote Start Ready ( ) mode without the use of a remote starter. See the Module Programming section for more information. ® For and Lincoln are registered trademarks and property of their respective companies © 2017 Directed. All rights reserved.

  • Page 2: Vehicle Application Guide

    • • • • • • • Legend: PK: Transponder & Immobilizer Override DL: OE Door Lock & Alarm Controls RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status © 2017 Directed. All rights reserved.

  • Page 3: Key2 Go

    Any first-time user must re-register to gain access to Key2 , and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2 is compatible with Xpress 4.5 or higher and requires an...

  • Page 4: Installation (Wiring Diagram ) S Type 1

    BCM (lower driver side of dash) (-) Trunk Release Brown/Yellow, pin 6 With the exception of the OBDII Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 5 Data C2153D at RFA Module. Remote Function Actuator, behind glove box. White HS CAN High White/Blue Data OBDII. Black HS CAN Low White Data OBDII. Black Trunk Release Brown/Yellow C2269 at trunk switch. Black © 2017 Directed. All rights reserved.
  • Page 6 C2153D at RFA Module. Remote Function Actuator, behind glove box. Black Immobilizer Data White/Blue or Blue Data C2153D at RFA Module. Remote Function Actuator, behind glove box. Black HS CAN High White/Blue Data OBDII. Black HS CAN Low White Data OBDII. Black © 2017 Directed. All rights reserved.
  • Page 7 21 20 19 (+) 12V: Red, pin 6 C2280 onnector at BCM (passenger kick panel) With the exception of the OBDII Diagno tic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.

  • Page 8: Type 2

    C3371 Backup Transceiver, rear of center console. Green Immobilizer Data White/Blue or Blue Data C3371 Backup Transceiver, rear of center console. Green HS CAN High White/Blue Data OBDII. Black HS CAN Low White Data OBDII. Black © 2017 Directed. All rights reserved.

  • Page 9: Smartstart/Xl 202 Installation Notes

    Combination Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information. & SmartStart Combination Refer to the Passive Keyless Entry ( ) Installation Guide (N2102T) for detailed wiring information. © 2017 Directed. All rights reserved.

  • Page 10: Module Programming

    Press the Push-to-Start ( ) button twice to turn the ignition press the START STOP LED flashes green (fast). brake pedal flashes Press x2 (fast) Go to the next page t complete the module programming. © 2017 Directed. All rights reserved.

  • Page 11: Module Programming: Key2Go

    Click on Submit Key2 Request Once the configuration is completed, r econnect the module. & turns solid green for 3 seconds, then turns off Solid x3 Secs You have successfully completed the module programming sequence. © 2017 Directed. All rights reserved.

  • Page 12: Module Reset & Hard Reset

    Wait 3 seconds until the LED turns solid orange , and w 10 more seconds & until the LED starts to flash orange red. Solid Flashes & Release the programming button. The turns solid red. Release Solid © 2017 Directed. All rights reserved.

  • Page 13: Feature & Option List

    2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the will turn orange for 2 seconds to confirm the end of the programming sequence. © 2017 Directed. All rights reserved.

  • Page 14: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2017 Directed. All rights reserved.
  • Page 15 Refer to feature when RFTD feature is disabled. programing section for more information. An RSR feature file mismatch was detected. Please Flashes red Feature error. contact Technical Support. © 2017 Directed. All rights reserved.

  • Page 16: Parking Light Error Codes

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2017 Directed. All rights reserved.

  • Page 17: Limited One-Year Consumer Warranty

    CLAIM OR DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER ’S...

  • Page 18: Quick Reference Guide

    This unique feature monitors a variety of parameters such as the key fob, vehicle * If the vehicle hood status is supported through data, it will also report a 7 flash speed sensor and door sensor, in order to perform takeover securily. safety override code. © 2017 Directed. All rights reserved.

  • Page 19: Smartstart Compatible

    2-way interaction with your vehicle. Connectivity is managed through the Press once, then to activate the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. x1 + rear hatch/tail glass release (optional).* For more information, visit www.mysmartstart.com.
  • Page 20 Quick Reference Guide Quick Reference Guide DBALL2-FORD3 Remote Start Ready (RSR) Installation Notes © 2017 Directed. All rights reserved.

This manual is also suitable for:

Xpresskit ford3

Table of Contents