Directed XPRESSKIT DBALL Installation Manual
Hide thumbs Also See for XPRESSKIT DBALL:

Advertisement

Quick Links

Platform: DBALL/DBALL2
Firmware: HK2
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
The HK2 firmware for DBALL2 is an all-in-one door lock and override module compatible with specific
HYUNDAI vehicles.
This module can only be flashed and configured using XpressVIP at www.directechs.com or
using the Directechs Mobile application for smartphones. Refer to the Module Programming
section on page 5 for more information.
Index
Vehicle Application Guide...................................................................................................................................................
Installation (Wiring Diagram & Vehicle Wiring Reference Chart)........................................................................................
Programming
Module Programming.........................................................................................................................................................
Module Reset.....................................................................................................................................................................
Hard Reset.........................................................................................................................................................................
Feature & Option List..........................................................................................................................................................
Feature Programming.........................................................................................................................................................
LED Diagnostics & Troubleshooting...................................................................................................................................
Limited One-Year Consumer Warranty...............................................................................................................................
Quick Reference Guide......................................................................................................................................................
® Hyundai is a registered trademarks and property of its respective company.
Rev.: 20160829
02
03
05
06
06
07
07
08
10
11
© 2016 Directed. All rights reserved.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XPRESSKIT DBALL and is the answer not in the manual?

Questions and answers

Summary of Contents for Directed XPRESSKIT DBALL

  • Page 1: Table Of Contents

    Module Programming................................. Module Reset..................................Hard Reset..................................Feature & Option List................................Feature Programming................................. LED Diagnostics & Troubleshooting........................... Limited One-Year Consumer Warranty..........................Quick Reference Guide..............................® Hyundai is a registered trademarks and property of its respective company. © 2016 Directed. All rights reserved.
  • Page 2: Vehicle Application Guide

    FOB: Sync CAN Interface w/ FOB Remote RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status This vehicle does NOT support virtual tach. Use tach and output from the DBALL/DBALL2 (D2D or W2W). © 2016 Directed. All rights reserved.
  • Page 3: Installation (Wiring Diagram & Vehicle Wiring Reference Chart)

    Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector. © 2016 Directed. All rights reserved.
  • Page 4 White Ignition Switch. White Parking Lights Pink Headlight Switch. White EMS COM Blue/Black 12 Data Driver Kick Panel EM11. White B-CAN High Green Data I/P-G fusebox. White B-CAN Low Orange Data I/P-G fusebox. White © 2016 Directed. All rights reserved.
  • Page 5: Module Programming

    The LED turns ON solid orange for 3 seconds then shuts off when & programming is done. Orange 3 seconds Key OUT Turn the key to the OFF position and remove it from the ignition. START You have successfully completed the module programming sequence. © 2016 Directed. All rights reserved.
  • Page 6: Module Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2016 Directed. All rights reserved.
  • Page 7: Feature & Option List

    No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. © 2016 Directed. All rights reserved.
  • Page 8: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2016 Directed. All rights reserved.
  • Page 9 The smart key was not detected, which prevents the Flashes red Smart key was not detected. system from shutting down the vehicle. The vehicle was detected as moving, which prevents the Flashes red Speed was detected. system from shutting it down. © 2016 Directed. All rights reserved.
  • Page 10: Limited One-Year Consumer Warranty

    Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...
  • Page 11: Quick Reference Guide

    3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2016 Directed. All rights reserved.

This manual is also suitable for:

Xpresskit dball2

Table of Contents