Table of Contents
Advertisement
Re-Pair Timer
Description
Options
from both devices and the devices
must re-pair.
Infinite (For all
This Timer only applies to the ac-
Bluetooth devi-
cessory. The programmable timer
ces)
choices are: 0 – 15 minutes, 2
hours, 4 hours or 8 hours.
Do note there are exceptions for
Operation Critical Wireless (OCW)
headset and PTT which are pre-
programmed to 8 hours.
This timer is a "stay alive" timer
where the accessory remains on
without the device reconnecting be-
fore powering off. The radio re-
mains on until the user powers off
the radio. The radio and accessory
remains paired indefinitely. Once
the device re-connect, the timer is
reset.
The radio could not control the Drop Timer of
Personal Area Networking (PAN), Dial-Up Networking
(DUN), Commercial Off- The-Shelf (COTS) and data
services. It depends on the specifications of these
external devices.
Check with your dealer or system administrator for
more information about these timers.
To establish the Bluetooth Connection, see
with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature
on page 143 or
Feature
on page 145 .
Pairing with Low Frequency-Motorola Proximity Pairing
(LF-MPP) Feature
Ensure that Bluetooth feature of your radio is on and
the Bluetooth tones are enabled.
Bluetooth tones, Bluetooth menu and preprogrammed
buttons must be preprogrammed by a qualified radio
technician. Check with your dealer or system
administrator for more information.
The range of Bluetooth operation when using a MCW
accessory is 10 meters line-of-sight communication.
This is an unobstructed path between the location of
the signal transmitter (your radio) and the location of
the receiver (your device or accessory).
Pairing
Standard Pairing
143
English
Advertisement
Table of Contents
