GE G30 Instruction Manual page 36

SPECIFICATIONS
GENERATOR UNBALANCE
Gen. nominal current:
Stages:
Pickup level:
Dropout level:
Level accuracy:
0.1 to 2 x CT rating:
> 2.0 x CT rating:
2
Time dial (K-value):
Pickup delay:
Reset delay:
Timer accuracy:
Operate time:
SPLIT PHASE PROTECTION
Operating quantity:
Pickup level:
Dropout level:
Level accuracy:
Pickup delay:
Timer accuracy:
Operate time:
SENSITIVE DIRECTIONAL POWER
Measured power:
Number of stages:
Characteristic angle:
Calibration angle:
Minimum power:
Pickup level accuracy:
Hysteresis:
Pickup delay:
Timer accuracy:
Operate time:
PHASE UNDERVOLTAGE
Pickup level:
Dropout level:
Level accuracy:
Curve shapes:
Curve multiplier:
Curve timing accuracy at <0.90 x pickup:
Operate time:
AUXILIARY UNDERVOLTAGE
Pickup level:
Dropout level:
Level accuracy:
Curve shapes:
Curve multiplier:
Curve timing accuracy at <0.90 x pickup:
Operate time:
THIRD HARMONIC NEUTRAL UNDERVOLTAGE
Operating quantity:
2-22
0.000 to 1.250 pu in steps of 0.001
2
2 (I t with linear reset and definite time)
0.00 to 100.00% in steps of 0.01
97 to 98% of pickup
±0.5% of reading or 1% of rated (whichever is greater)
±1.5% of reading
0.00 to 100.00 in steps of 0.01
0.0 to 1000.0 s in steps of 0.1
0.0 to 1000.0 s in steps of 0.1
±3% of operate time or ±20 ms, whichever is greater
<50 ms at 60 Hz
split phase CT current biased by generator load current
0.020 to 1.500 pu in steps of 0.001
97 to 98% of pickup
±0.5% of reading or ±1% of rated
0.000 to 65.535 s in steps of 0.001
±3% of operate time or ±5 cycles, whichever is greater
<5 cycles at 1.10 × pickup at 60 Hz
3-phase, true RMS
2
0 to 359° in steps of 1
0.00 to 0.95° in steps of 0.05
–1.200 to 1.200 pu in steps of 0.001
±1% or ±0.001 pu, whichever is greater
2% or 0.001 pu, whichever is greater
0 to 600.00 s in steps of 0.01
±3% of operate time or ±1/4 cycle (whichever is greater)
<50 ms
0.004 to 3.000 pu in steps of 0.001
102 to 103% of pickup
±0.5% of reading from 10 to 208 V
GE IAV Inverse;
Definite Time (0.1s base curve)
Time dial = 0.00 to 600.00 in steps of 0.01
±3.5% of operate time or ±1/2 cycle (whichever is greater) from pickup to operate
<30 ms at 0.9 pickup at 60 Hz for Definite Time mode
0.004 to 3.000 pu in steps of 0.001
102 to 103% of pickup
±0.5% of reading from 10 to 208 V
GE IAV Inverse, Definite Time
Time Dial = 0 to 600.00 in steps of 0.01
±3.5% of operate time or ±1/2 cycle (whichever is greater) from pickup to operate
<30 ms at 0.9 pickup at 60 Hz for Definite Time mode
3rd harmonic of auxiliary undervoltage
CHAPTER 2: PRODUCT DESCRIPTION
G30 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL