GE G30 Instruction Manual page 106

ADD DEVICE TO SOFTWARE
2. Right-click the Local Area Connection icon and select Properties.
3
3. Select the Internet Protocol (TCP/IP) item from the list, and click the Properties button.
4. Click the "Use the following IP address" box.
5. Enter an IP address with the first three numbers the same as the IP address of the G30 relay and the last number
different (in this example, 1.1.1.2).
6. Enter a subnet mask equal to the one set in the G30 (in this example, 255.0.0.0).
7. Click the OK button to save the values.
3-54 G30 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION