Accepting A Call - UTStarcom UTS708SY Instruction Manual

*SM-801 PHS/sec3(GB) 00.3.9 4:52 PM
3. Basic operations

ACCEPTING A CALL

The ringer will sound and the display will flash when a call is received.
1 Call is received.
Press q and talk.
2
• In Use and the approximate time connected are displayed.
• In Use and the approximate time connected are not displayed
in the home mode.
• If the phone is in the charger socket, simply remove the phone
from the socket to answer a call.
To hang up w
3
• The standby mode resumes.
• The phone will be also hung up automatically
when it is returned to the charger socket.
When a call is received from;
• The caller who is on your phone book
• The caller who has caller ID turned on
• If the name in the entry has 12 or more letters, the phone num-
ber will not be displayed. The same number can also be stored
several times. In this case, only one of the names will be dis-
played.
IF THE CALLER IS NOT IN THE PHONE BOOK, OR IS IN
YOUR SECRET PHONE BOOK
• If the caller has Caller ID turned off
NOTES
• When the phone rings
w
Press any key except and
phone is not answered, Missed_Calls will be displayed. Refer to the incoming
calls log to see who called. (p. 45)
• If the number dialed from exceeds 12 digits
The last 12 digits of the received number will be displayed.
• If the phone rings while composing a melody
The composition will be saved to that point. You can resume composition after
completing the call.
Page 42
Indicates the
time connected.
r
to answer the phone immediately. If the
42
REDIALING
Dialed numbers are logged in sequence together with the date and time the call was
placed. Numbers in this redialing log can be easily redialed. Numbers stay in the log
when the phone is turned off.
• Up to ten numbers can be kept in the redial log (including the number memo pad (p. 47)).
• Numbers can also be redialed by pressing q
Reminder: The date and time must first be set (see p. 35) to use this feature.
Redial a number
Press y
1
• Numbers are displayed in sequence from the last number dialed.
• If no numbers are in the Redial No Data will be displayed and
the standby mode will resume.
• The cursor arrows will not be displayed if there is only one
number in the log.
2 Press [ to display the number to redial.
y
• : displays numbers from oldest to most recent
i : displays numbers from most recent to oldest
• If a number is also in your phone book, the name will be
displayed. If the same number is entered twice in the
phone book, one of the names will be displayed.
• If a number is also in your secret phone book, only the
number will be displayed.
Press q
3
• The displayed number is dialed.
• Press r to transfer and store the number in the phone
book (p. 84).
NOTES
• The same number will not be stored twice in the redial log.
A number is stored only once in the log together with the date and time the
number was last dialed.
• Maximum 32 digits per number
If a number is in the phone book, a name and up to 12-digit number will be
displayed. If a number is not in the phone book, numbers in the redial log can
have up to 24 digits. For longer numbers, press
digits; press it again to return to the previous display.
43
3. Basic operations
continued to next page
and then following the sequence below.
p either way to display all