UTStarcom UTS708SY Instruction Manual page 19

*SM-801 PHS/sec2(GB) 00.3.9 4:32 PM
2. Before using your phone
SETTING AN LOCK CODE
Set the four digit lock code to your favorite code. This code is used for the following
functions: phone lock (p. 37), erase all phone book entries (p. 89), secret mode (p. 93),
reset (p. 110), and reset all (p. 101).
The lock code is factory set to 3210.
• When you change the Lock Code, be sure to write it down somewhere so you
don't forget it.
Press es6s0
1
or esus[
Press esEnter the current 4-digit Lock code.
2
3 Enter the new 4-digit Lock code.
• appear in sequence from the right.
4 Re-enter the new 4-digit Lock code.
• appear in sequence from the right.
NOTES
• If you forget your lock code...
All functions that require the lock code (phone lock, erase all
phone book entries, secret mode, reset, and reset) will be inac-
cessible. If this happens, take your phone together with your
service agreement or contract and personal identification to
your dealer.
• If you enter the wrong number...
This display appears and the standby mode resumes.
Page 36
36
PREVENTING SOMEONE TO USE YOUR PHONE
The phone lock feature lets you prevent unauthorized callers to use your phone by
requiring your lock code to dial. Calls can still be received without the lock code.
The phone lock feature is off by default.
Phone lock
Press es6s1
1
or esus[
esEnter the lock code.
2
• appear in sequence from the right.
Press 1 (Lock)
3
• Press 0 or w to cancel and return to
Cancel phone lock
1 Enter the lock code.
• appear in sequence
from the right.
NOTES
• If the phone lock is turned on....
Lock_Phone and appear on the display.
• If a call comes in when Lock_Phone is on...
Lift the phone from the charger socket, or press any key except
answer. Lock Phone will not be cancelled when the phone is hung up.
• Lock_Phone takes precedence over the anniversary (p. 72) settings.
• If you enter the wrong number...
This display appears and the standby mode resumes.
37
2. Before using your phone
(LOCK PHONE)
1
w t
to