Using A Headset; Using The Vibration Ringer Mode - UTStarcom UTS708SY Instruction Manual

*SM-801 PHS/sec3(GB) 00.3.9 4:53 PM
3. Basic operations

USING A HEADSET

A digital headset (sold separately) can be connected to the headset jack to talk with-
out holding the phone. Particularly convenient when you must use both hands while
using the phone.
Connecting a headset
1 Plug the headset into the jack.
NOTES
• If you select the hands-free mode or speaker monitor mode while a headset is
plugged in (p. 50)
You will not be able to hear anything through the headset.
• Analog headsets should not be used and may not work properly.
• The ringer is heard only from the phone and not through the headset.
• The headset jack is compatible with three-terminal headset plugs only.
Analog modems and audio equipment cannot be used through the headset
jack.
• Headsets with switches may be used but the switches will not be operative.
Page 52
52

USING THE VIBRATION RINGER MODE

When the vibrating ringer is turned on, the phone will vibrate to let you know the
phone is ringing. The vibrating ringer is turned off by default.
Press es1s5
1
or esus[
Select o..."On"
2
Select u..."Off"
NOTES
• When the vibrating ringer is on...
V is displayed in the standby mode.
• To turn the audible ringer off...
Set the ringer volume to off (p. 55).
• When the phone is in the charger socket
The ringer will not vibrate even when the vibrating ringer is turned on. The
ringer will sound audibly at the volume setting. If the ringer volume is turned
off, it will ring at the medium volume level.
• If the vibrating ringer is turned off and the ringer volume is turned off, the
ringer will neither vibrate nor sound audibly when a call comes in.
53
3. Basic operations
(Vibrating ring)