Setting The Usage Mode - UTStarcom UTS708SY Instruction Manual

*SM-801 PHS/sec2(GB) 00.3.9 4:32 PM
2. Before using your phone

SETTING THE USAGE MODE

Setting the operating mode
Any of five modes can be selected as desired.
1. Public; 2. Home; 3. Trn (transceiver); 4. Home/Pub.; 5. Pub./Trn.
Press esq
1
or esus[
• The current setting flashes.
• ts is not displayed if only the public number is set.
Select the desired mode with p, and press e.
2
• Select the desired mode directly with 1-5
Public mode: .......... 1
Home mode: .......... 2
Trn. mode: .............. 3
Home/Pub. mode: .. 4
Pub./Trn. mode: ...... 5
NOTES
• If not registered as an extension phone...
Home, Trn, Home/Pub, Pub/Trn will not be displayed.
• The standby mode time is shorter in the Trn, Home/Pub, and Pub/Trn modes
than in the Public mode.
Page 38
When set to the
public mode
38