Table of Contents
Advertisement
*SM-801 PHS/sec3(GB)
00.3.9 4:53 PM
3. Basic operations
USING THE CALL-ANSWERED VIBRATION MODE
The phone will vibrate for approximately 0.5 second when you place a call and the
other party answers. This mode is turned off by default.
Press es1s6
1
or esus[
Select o..."On"
2
Select u..."Off"
NOTES
• Depending on the type of phone used by the other party, there may be a brief
pause between when the phone vibrates to indicate he/she has answered the
phone, even if the Vib.Call mode is turned on.
Page 54
(Phone vibrates.)
54
RINGER VOLUME ADJUSTMENT
Adjust the ringer volume. The setting is retained when the phone is turned off. The
ringer volume is set to medium by default.
Press es1s4
1
or esus[
• The current setting is displayed.
Low
Press es p to
2
select the volume.
What is sliding volume?
The ringer volume gradually
increases or decreases,
depending on the setting.
Off
Press e to set.
3
NOTES
• When the ringer volume is turned off...
S will be displayed when in the standby mode. Incoming calls
will be indicated by a flashing
e
button and backlight display,
or by a Vibration (if turned on, see p. 53).
• Confirm the ringer volume.
Check the ringer volume using the ringer type selection (p. 56).
• The ringer volume setting will also be used for the scheduler (p. 70) and alarm
clock (p. 74).
55
3. Basic operations
Medium
High
Sliding volume
Sliding volume
When set to High.
Advertisement
Table of Contents
