Part Names And Their Functions - UTStarcom UTS708SY Instruction Manual

*SM-801 PHS/sec1(GB) 00.3.9 4:16 PM
1. Introduction

PART NAMES AND THEIR FUNCTIONS

q Retractable antenna
The phone can be used with the antenna retracted.
For better reception, extend the antenna.
w Hole for attaching the hand strap (p. 6)
e Power Search key (p. 41)
Selects the strongest signal for best reception.
r Speaker
Used for the ringer, warning tones, and other system alerts. Also used for hands-
free and speakerphone reception.
t Battery cover
y Headset jack (p. 52)
Lets you use a headset to converse without holding the phone.
Page 18
Extend Shrink
18
u Function selection key (p. 17, 27)
e
Used to select and set each function.
i Cursor (p. 17, 27)
]
Press up, down, right, or left to select a function. Also used for
cursor movement.
o Talk/hands-free mode selection (p. 39, 49 to 51)
Q
Used when placing and answering incoming calls. Also used to
switch to the hands-free, speakerphone, and whisper modes.
!0 Power on/off (p. 26)
Turns the power on/off, hangs up the phone, and interrupts any
selected functions.
!1 Dialing keys
0–9
Used to dial a number, as well as program various numbers and
letters, and for function selection.
!2 [ ] (asterisk) key (p. 78, 90, 103, 104)
-
!3 [
# ] (pound) key (p. 65)
=
!4 Recording, text mode key (p. 96)
R
Recording a call, and the text entry mode.
!5 Hold, clear, Intercom key (p. 48)
t
Puts a call on hold, and cancels hold. Also used to delete entries
in the phone book, incoming calls log, and individual letters.
!6 Microphone
!7 Ear speaker
!8 Display (p. 20)
!9 Data communications card slot
(data communications terminal) (p. 80)
1 .Introduction
19