UTStarcom UTS708SY Instruction Manual page 51

*SM-801 PHS/sec6(GB) 00.3.9 5:40 PM
6. RECORDING FUNCTIONS
RECORDING A CALL
It is possible to record the voice of the person you are talking to during a call.
The recording is stored even if the power is switched off.
• Up to four recordings can be stored (the maximum length for each is 15 sec-
onds). The total recording time allowed is 60 seconds.
Reminder: The following operations apply when a call is in progress.
1 While a call is in progress, press
r.
• If there are already four stored recordings
The message on the right is displayed, and you are returned
to the conversation. You will have to delete one of the record-
ings before you can make a new one (P97).
• When you return to standby mode
after making a recording...
"Message" is displayed, and the
right of the screen with the number of messages.
The "Message" and mark/number of messages displays
disappear when you play the message or remove the battery.
Press r again to stop recording and return to the conversa-
2
tion. Recording stops automatically after 15 seconds.
• When you press w to hang up
The recording up until that time is stored.
NOTE
• Playing, deleting a message (P97)
• To make a second recording during the same call, press
• You cannot make recordings of extension conversations (P103) or transceiver
conversations (P108).
Page 96
mark is displayed on the
r again.
96
PLAYING, DELETING A MESSAGE
Recordings can be played back later, and be erased either individually, or all at
once.
Reminder: The following operations apply to the case that a recording has been
made, and the mark and number of recordings are displayed on
right of the screen.
Playback
rs[
1
• The messages are played in order from the oldest.
• A beep sounds (Pi-) between messages.
• Press the i button while a message is playing to jump to the next mes-
sage.
Press the button to return to the previous message.
y
• Press w to finish.
Deleting individually
2 Playback the recording that you want to delete, and while it is
playing, press t and then 1 .
• When you delete a message, the next message is played.
If you press 0 to avoid deletion of a message, that message is played
again.
• If there are no more messages, "Playback End" is displayed, and you are
taken to step 3.
97
6. Recording functions
(continued to next page)