Placing A Call - UTStarcom UTS708SY Instruction Manual

*SM-801 PHS/sec3(GB) 00.3.9 4:52 PM
3. BASIC OPERATIONS

PLACING A CALL

Example: Dial: 900-9888
1 Enter the number to dial.
• BE SURE TO INCLUDE THE AREA CODE.
Mistakes can be corrected as follow.
(press)
t
t (press and hold)
• DIALING AN ISDN TERMINAL
phone number s s subaddress s
-
This sequence will dial a specific ISDN terminal. (Note that the specific opera-
tion may vary with the ISDN equipment used.)
Press q
2
• The number dialed will scroll across the screen.
• If Caller ID is turned off, the called party's number will not be displayed while
talking.
3 Talk
4 Hang up.
• The standby mode is resumed after displaying the time connected.
Page 39
continued to next page
Deletes the last digit.
Deletes the entire number.
q
• In Use and the approximate time con-
nected are displayed. (Not displayed in
the home mode.)
39