Table of Contents
Advertisement
*SM-801 PHS/sec4(GB)
00.3.9 5:04 PM
4. Convenience features
ANNIVERSARY DATES
You can store up to 10 important anniversary events (birthdays etc.). When the day
specified for an anniversary event arrives, the message set for it is displayed during
standby mode for the period of that day.
Reminder: The date and time (P35) must be set in order to use the Anniversary
function.
Press es4s6
1
or esus[
[
Press e s
2
[to select a
number (from 0 to 9) for the
anniversary event]spresse
again.
• If an anniversary is already set for the
number that you select, that anniversary
is displayed.
When an anniversary date arrives:
• The message for the anniversary is displayed in standby mode for that day (the
data is retained unless manually deleted).
Input the date s press e
3
• It is not possible to set more than one anniversary per day.
Input the message s presse
4
• If the data already exists, it is displayed.
• Up to 20 characters can be entered for each anniversary
item.
Entering text (P63 to 66)
Page 72
72
Use p to select a mark.
5
(use
0
to
9
,
=
or
-
for direct selection)
• If the data already exists, the selected mark will flash.
• The marks provide a convenient means of distinguishing between anniversary
events.
ANNIVERSARY MARKS
Press e
6
When an anniversary date arrives:
• The message for the anniversary is displayed in
standby mode for that day (the data is retained unless
manually deleted).
Deleting an anniversary event
1
Use the procedure in step 2 to select the anniversary that you wish
to delete, and then press t then 1 to delete it.
• Press
0
to cancel the operation and return to the anniversary selection
screen.
• When entering the text in step 4,, you can delete all text by pressing and hold-
ing
t
until the text is deleted, and then pressing
4. Convenience features
Name of the selected mark
e
.
73
Advertisement
Table of Contents
