Redialing - UTStarcom UTS708SY Instruction Manual

*SM-801 PHS/sec3(GB) 00.3.9 4:52 PM
3. Basic operations

REDIALING

Deleting numbers from the redial log
1 Display the number to delete.
s t (press and hold)
• Press t to delete the last digit of the displayed number.
o (to delete one number)
2
• When numbers are deleted one by one
The standby mode resumes when the last number in the redial
log is deleted. The next number in the log is otherwise dis-
played.
u (to delete all numbers)
• When all numbers are deleted
The standby mode resumes after deleting all numbers in the
redial log.
NOTES
• If more than 10 numbers are dialed (including number memos), the oldest
number will be deleted.
• Maximum 32 digits per number
If a number is in the phone book, a name and up to 12-digit number will be
displayed. If a number is not in the phone book, numbers in the redial log can
have up to 24 digits. For longer numbers, press
digits; press it again to return to the previous display.
• Numbers can be transferred from the redial log to the phone book (p. 86).
If a name is changed in the phone book, the redial log is also changed to
reflect the new name.
Page 44
either way to display all
p
44
DIALING FROM THE INCOMING CALLS LOG
Incoming calls are also logged in sequence together with the date and time the call
was received. Numbers in this incoming calls log can be easily called back. Numbers
remain in the log when the phone is turned off.
• Up to ten numbers can be kept in the incoming calls log.
• Numbers can also be called back by pressing
below.
Reminder: The date and time must first be set (see p. 35) to use this feature.
Call a number from the incoming calls log
Press i
1
• Numbers are displayed in sequence from the last call received.
• If no numbers are in the IncomingCall No Data will be displayed and the stand-
by mode will resume.
• The cursor arrows will not be displayed if there is only one number in the
log.
[s to display the number to redial.
2
y
• : displays numbers from oldest to most recent
i : displays numbers from most recent to oldest
• : indicates a call was answered by the user
: indicates the call was not answered
• If Caller ID was on and the caller is in your phone book, the caller's name will
be displayed. If the same number is entered twice in the phone book, one of
the names will be displayed.
• If Caller ID is on and the caller is either not in your phone book or is in your
secret phone book, only the number will be displayed. (When the secret
mode is off)
45
3. Basic operations
(continued to next page)
and then following the sequence
q
If the caller has
Caller ID turned off