JLG E450A Operation And Safety Manual page 51

11. Soft Touch/SkyGuard Override Switch (If equipped)
The machine can be equipped with one of three options. It
may have Soft Touch, SkyGuard, or both Soft Touch and Sky-
Guard.
If equipped with Soft Touch, the switch
enables the functions that were cut out
by the Soft Touch system to operate
again at creep speed, allowing the
operator to move the platform away from the obstacle that
caused the shutdown situation.
If equipped with SkyGuard, the switch
enables functions cut out by the Sky-
guard system to be operated again,
allowing the operator to resume use of
machine functions.
If equipped with both Soft Touch and
SkyGuard, the switch operates like
described above and allows the opera-
tor to override the system that has
experienced a cutout situation.
3121647
SECTION 3 - MACHINE CONTROLS AND INDICATORS
12. Soft Touch/SkyGuard Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object or the
SkyGuard sensor has been activated. All controls are cut out
until the override button is pushed. For Soft Touch, controls
are then active in the Creep Mode or for SkyGuard, controls
will work normally.
13. Lower Boom Lift
Provides for raising and lowering of Lower
and Mid Boom when positioned to Up or
Down. Upper lift will not function when
operating lower lift.
14. Platform Rotate
The Platform Rotate control switch allows the
operator to rotate the basket to the left or right
when positioned to the desired direction.
– JLG Lift – 3-11