JLG E450A Operation And Safety Manual page 111

2. Tighten nuts in the following sequence:
3121647
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3. The tightening of the nuts should be done in stages. Follow-
ing the recommended sequence, tighten nuts per wheel
torque chart.
4. Wheel nuts should be torqued after first 50 hours of operation
and after each wheel removal. Check torque every 3 months or
150 hours of operation.
– JLG Lift –
Table 6-10. Wheel Torque Chart
TORQUE SEQUENCE
1st Stage 2nd Stage
40 ft. lbs. 100 ft. lbs.
(55 Nm) (130 Nm)
3rd Stage
170 ft. lbs.
(255 Nm)
6-19