Skyguard Function Test - JLG E450A Operation And Safety Manual

SkyGuard Function Test

From the Platform Console:
Test the SkyGuard feature by operating the telescope out func-
tions and then activating the SkyGuard sensor. The telescope out
function will stop and the telescope in function will operate for a
short duration and the horn will sound until the SkyGuard sensor
and footswitch are disengaged.
3121647
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
– JLG Lift –
NOTE: If the machine is equipped with both SkyGuard and Soft Touch,
functions will not reverse, only stop.
NOTE: If equipped, ensure the blue beacon illuminates when SkyGuard
is activated.
Disengage the SkyGuard sensor, release controls, recycle the foot
switch, make sure normal operation is available.
If SkyGuard remains activated after function reversal or cutout,
depress and hold the SkyGuard Override Switch to allow normal
use of machine functions until the SkyGuard sensor is disen-
gaged.
2-7