This panel clearly shows:-
a) The datasheet in use (DEP Test Generic 2.xls)
b) The datasheet columns ([PieceID] through to [Match])
c) Designer tree with named layouts and their content
Before adding any new customer design to the project delete any unwanted images,
text fields, barcodes, etc.
5.5 Page Setup
Begin changing the template by selecting the envelope size (as it enters the printer)
On the designer tab, select page size
Page type always Full page
Paper size selected from list or 'User defined size'
Example shown is for a #10 envelope 4 1/8" (241mm) x 9 ½" (105mm)
Page | 20
NOTE
If you change the paper size from the NTL
Generic template to a new paper size, say 6"
x 9.5", then you need to repeat the page
setup for each layout
To Contents