Windows Setup - Neopost HD-M11dn Setup Manual

Software
Installation

Windows Setup

Model HD-M11dn: Install the
Driver on a Network
First, Print the Menu Map
Model HD-M11dn
1 Press Menu s or t on the control panel to select
the Information Menu.
2 Press OK button.
3 Press the s or t button to select Network.
4 Press OK button to print the Menu Map.
Keep these sheets handy: they contain
information you need to set up the printer on
your network.
Second, Install the Driver
Model HD-M11dn
1 Insert the CD in the CD-ROM drive. The CD will
autorun.
2 Select your language. Click Next.
3 If you accept the license agreement, select I
Accept.
4 Select the Driver Setup tab then click Install
Driver.
5 Select nNetwork printer.
6 Select Directly to the network using TCP/IP.
7 Enter the IP address (locate the address on
the Print Menu Map in the Network Menu) or
select Search Address to locate the printer on
the network.
8 Follow the on-screen instructions.
Third, Test the Printer Driver
Installation
Model HD-M11dn
To make sure the printer driver is correctly
installed, print a test page:
1 On the Windows taskbar click Start/Settings/
Printers.
2 Right-click the printer model then click
Properties.
3 Click the Print Test Page button. Reinstall the
driver if the installation failed.
Configure Settings Using a Web
Browser (optional)
Model HD-M11dn
If you are working in a TCP/IP-enabled
environment, you can use a web browser to
display the printer or job printing status, and to
change settings on an embedded web page.
1 Activate your web browser (Microsoft
®/
Explorer
higher, Mozilla
2 Enter the IP Address for the printer. (Locate
the address on the Print Menu Map in the
Network Menu.
3 When the web page appears, select from the
categories in the menu list.
Model HD-M11dn: Install the
Driver on a USB or Parallel
Setup
Install the Driver
1 Insert the CD in the CD-ROM drive. The CD will
autorun.
2 Select your language. Click Next.
3 If you accept the license agreement, select I
Agree.
4 Select the Driver Setup tab then click Install
Driver.
5 Select Local Printer. Click Next.
6 Select the Port: USB or LPT1 (Parallel). Click
Next.
7 Select printer model. Click Next.
8 If your model is a HD-M11dn, select printer
emulation type (PCL or PS).
9 Follow the on-screen instructions.
10 When done, click Finish.
Test the Printer Driver Installation
To make sure the printer driver is correctly
installed, print a test page:
English 8
™, Netscape Navigator™ 4.4 or
® ®
, Firefox ).