Important Note - Neopost DS-600i User Manual

5.0 Creating a Project in Flexmail
5.1 Introduction
This part of the document explains the setup procedure for using the Flexmail v4.2 (or
above) software with the DS-600i/200i for controlling the DEP
The DEP printer is controlled by a software application called Flexmail. This software
application sends commands to the printer as well as the data that needs to be printed
on the envelope. The DS-600i/200i communicates with the Flexmail software
application via a script file.
For more detailed information on using the Flexmail application see Flexmail 'Getting
Started' document in the Flexmail application.
Flexmail requires a project to be setup for each printing application. The project
determines the Envelope size, the print head position, the data to be printed, where
the data is stored as well as many of customizable settings (DPI, orientation, etc.)
For a brief video introduction, Please follow this link
systems.com/Help/HelpVideo.aspx
5.2 Projects and Templates
NTL provides both sample Flexmail 'Projects' and sample 'Templates', which include
databases, test documents, AIMS configurations and JAF files, etc. These projects and
templates ensure that ALL DEP settings are correct before starting to create customer
projects for the DEP
Testing during installation
It is recommended that:-
a) During installation and commissioning the sample NTL Flexmail Projects are
used. These can be found in:-
C:\Users\Public\PublicDocuments\FlexSystems\FlexMail 4.2\Projects\Neopost
Samples
Both US and European version are supplied
If you choose NOT to use the NTL templates then you must ensure that you set:-
 Envelope size (go to File - Page Setup)
 Position of the Print heads relative to the Envelope (select the rule on the left hand
side and drag the print heads to the desired location. Repeat for U1 and U2)
Page | 11

Important Note!

http://www.flex-
To Contents