Print Orientation - Neopost DS-600i User Manual

To Contents
Once you have started the print process you cannot edit the project or start another
open project.
If you want to change operation to another project you must first 'Stop' the print
process by pressing the adjacent Stop button
Typical example of commands sent and received by the system
Script Version NTL4i

5.11 Print Orientation

Once a printer has been added it is necessary to manually select the print direction /
orientation within the Flexmail project. The software will select the direction as "Auto
select" each time the application is loaded / run.
This is not correct / compatible the DS-600i envelope printing system. To prevent this
manual adjustment, follow the instructions below to lock the direction in the printer.
Power on the printer, turn the printer offline and navigate as follows:-
Select Home, Job Parameters (press right arrow), Layout (press right arrow),
Orientation(press OK), select direction as REV, press and hold the OK button until the
padlock symbol appears in the top right hand side.
Now return to the printer run screen and press ONLINE. The direction will always be
reverse regardless of the settings on the PC
Page | 33