Creating A Customer 'Project' From The Ntl 'Template - Neopost DS-600i User Manual

To Contents
5.3 Creating a customer 'Project' from the NTL
'Template'
Recommended method!
Begin by opening Flexmail
From here the default template will open and will look like below
For variable printing you will need to import a database.
This is what is used to determine which address is printed on which envelope. This
database also contains all of the variable data that is going to be printed on the
envelope.
A link in the project needs to be set to the required database.
Depending on scripting mode the database will need to contain a 'Lookup' field so the
correct address information can be looked up in the database and printed on the
correct envelope. All databases MUST have column headings in the database so that
they can be defined as an envelope Lookup field within the project
Page | 14