5.2.1 Installation of the parallel virtual connection
1. Call up Setup.exe in the corresponding driver directory.
2. Follow the instructions in the setup window. Press Install to install the driver.
To cancel the installation, press Exit.
Illustration 5-2: USB Compound device setup
3. The installation program now shows the following message:
Installation is in Progress... Please Wait
4. Finally, the following message is displayed:
Illustration 5-3: USB Compound device setup
5. To leave the installation program, press Exit.
6. Connect the USB cable to the printer and to your computer.
7. Windows recognizes the new USB device and automatically begins installing
the driver for the newly connected device.
8. When the Windows desktop is displayed once again, the driver installation is
complete.
24