To Contents
Setting up Multiple layouts
Create layout 1 as required
In the table view on the right hand side of the screen right click on layout 1 and choose
'Layout options'
New layouts are added using the new button. Once added each layout should be set up
as described below
Type is "Fixed page" and Rule is "Is used Always" for all 5 layers (the order should be
as shown above 1-5)
To modify layout 2 (to add the required font data) layout 2 needs to be visible within
the project. To do this close the above screen and simply use the scroll bar to the right
of the left hand designer panel until layout 2 is visible.
To work on this layout left click anywhere in the left hand panel on the envelope layout.
Page | 29