5.9 Print Quality DPI and Transport Speed
Provided you have used the NTL Generic template you will not need to go to these
settings. However, they are described here for completeness
Transport Speed should be set to 1500 mm/s - 1080 mm/s for DS600i (slower for
thicker packs)
Recommended DPI should be set to a 400 dpi (2x6) (500DPI 3x6 is achievable on the
DS600i)
Cleaning cycle must be set to OFF
Page | 31
Height adjustment for pack
thickness and print quality is
a manual setting (follow
instructions in DEP
documentation for help)
All print cartridges are black
(HP C8842A) (3 per print
Head)
Pack thickness consistency
can only vary by 1-2mm as
print heads are fixed
To Contents