Chapter 2: Unpacking & Basic Checkout
Attaching The Hand Strap
Important:
2.1.3.1
Note: A Phillips head screwdriver is required.
Psion Teklogix recommends that the hand strap provided with your 7535 always be
used. However, if your unit has an internal scanner and you plan to use the pistol
grip accessory, a hand strap is not required.
Two Phillips head screws are provided with the hand strap.
•
Attach the strap to the two threaded inserts located at the back of the 7535
near the top of the unit.
14
Teklogix 7535 Hand-Held Computer User Manual
Do not use adhesives such as Loctite to secure the screws on the
carrying accessories. These chemicals may damage the plastic
casing.
Attaching The Hand Strap
Figure 2.1 Attaching The Hand Strap