Psion Teklogix 7535 User Manual page 108

Chapter 5: Configuration
Scanner Options
Click Data
For both integrated and external scanners, this parameter determines which
character is sent to the application installed in your 7535 following a double-click.
Enter the ASCII value of the character desired from
<LEFT> or <RIGHT> arrow keys to scroll through a set of ASCII characters not
available from the keyboard.
Display Options
Indicator
When this parameter is enabled (√), the laser warning logo appears on the display
whenever the scanner is activated.
Result
When this parameter is enabled (√), the type of bar code and the result of the scan
appear on the screen. Note that this information is only displayed after a successful
decode and is visible only while the scanner trigger is pressed. When the trigger is
released, this information is cleared from the screen.
Dot Time
The value selected for "Dot Time" determines how long the targeting dot remains on
before the scanner switches to a normal scan sweep. The allowable values are:
0, 0.1, 0.5, 1.0, 1.5, 2.0, 2.5
disables the target dot.
Result Time
The value assigned to the "Result Time" parameter determines how long the scan
results of a successful scan are displayed on the screen. Time is measured in
seconds, and a value of "0" (zero) disables the parameter.
Note: To remove the scan result from the screen before the "Result Time" has
expired, perform an unsuccessful scan.
88
Teklogix 7535 Hand-Held Computer User Manual
to . You can also press the
0 255
and seconds. A value of
3.0
(zero)
0