Anchor View - Psion Teklogix 7535 User Manual

Chapter 6: Tekterm Application

Anchor View

Entry Mode
"Entry Mode" parameters allow you to select a data entry mode. The modes are:
,
insert replace
Movement" on page 122 describes these modes in detail.
Open Fky Only
When this parameter is enabled (set to "Y"), the screen is open for function keys
only, and the cursor is not positioned. When this parameter is disabled, the screen is
open for data entry, and the cursor is placed in the first field (if it exists).
Ign Bcode_fld
When this parameter is enabled (set to "Y"), fields that were defined as "bar code
only" accept data from the keyboard as well as the bar code reader. In effect, they
behave as data entry fields.
Enh Edit Mode
This mode provides extended (enhanced) functions to users of Psion Teklogix' IBM
5250 terminal emulation. When this parameter is enabled (set to "Y"), the arrow
keys move the cursor anywhere on the screen, unrestricted by fixed or entry fields.
Certain 5250 emulation keys (e.g. Field Exit) that were originally available only
when "Enh Edit Mode" was set to "Y" are now active at all times in TESS
applications.
Refer to "IBM 5250 Emulation Keys" on page 121 for details about these keys.

6.17.2.8 Anchor View

When enabled (set to "Y"), this parameter locks the display at a defined location on
the screen, preventing it from shifting when the cursor is moved. The "x origin" and
"y origin" coordinates specify where the screen origin, the upper left corner of the
screen, will be fixed.
190
Teklogix 7535 Hand-Held Computer User Manual
, and
field fcursor
Anchor
05
x origin
y origin
. "TESS Edit Modes And Cursor
Range
1 1..24
1 1..80