Psion Teklogix 7535 User Manual page 184

Chapter 6: Tekterm Application
Screen
# of Rows
This parameter defines the logical page length (in lines) used by the host computer
application. Emulator systems trim the host application screens to this length. This
page length cannot be smaller than the length of the hand-held's display. Display
panning is used if the page is longer than the display.
Note: The value in this parameter must be an even number.
# of Cols
This parameter defines the logical page width (in characters) used by the host
computer application. Emulator systems trim the host application screens to this
width. This page width cannot be smaller than the width of the display. Display
panning is used if the page is wider than the display.
Note: The value in this parameter must be an even number.
Default font
This parameter determines the default font that appears when the 7535 memory is
reset. The allowable values are:
,
22x30 22x48
(Traditional Chinese),
10x9
,
13x15 13x20
(Simplified Chinese).
16x15
• Use the <RIGHT> or <LEFT> arrow key to scroll through the available
options.
80-col. font & 132-col. font
These parameters are used to set the font size on the screen if the default font is not
acceptable. An escape sequence must be sent from the host before a hand-held can
switch to either
• Use the <RIGHT> or <LEFT> arrow keys to scroll through the size options
for these parameters. The font sizes are listed in "Default Font" above.
164
Teklogix 7535 Hand-Held Computer User Manual
16x30
, , ,
33x30 33x40 33x48
,
10x15
, , ,
14x30 15x21 16x15
. or
80-col font
, , ,
19x30 19x40 22x15
, , (Thai),
8x15 8x20
(Korean),
11x10 12x24
(Traditional Chinese),
. .
132-col font
, , ,
22x20 22x24
(Arabic),
9x12
(Thai), ,
13x12
(Korean),
16x15