Table of Contents
Advertisement
6.2
Installation
This section describes how to interconnect modules and how to mount them on a DIN rail.
• Modules must be mounted on a DIN rail.
• Connect an END cover on the right of the terminal module.
(1) Precautions for connecting and mounting modules
• Do not directly touch any conductive parts and electronic components of the module. Doing so can cause
malfunction or failure of the module.
• The number of times the module can be connected/disconnected is limited to 50 times. (In accordance with
IEC 61131-2) Exceeding this limit may cause malfunction.
• Do not drop or apply strong shock to the module case.
• Do not remove the printed-circuit board of the module from the case. Doing so may cause failure of the
module and/or printed-circuit board.
36
Advertisement
Table of Contents
Troubleshooting
