(2) Transient transmission
The Motion controller can directly access the buffer memory of an intelligent function module connected to the
head module by transient transmission.
The Motion controller sends requests to the head module with dedicated instructions ( Programming Manual
(Motion SFC) for the Motion controller used).
Motion controller
Command
RST M0
RFROM W0,K2,H02,H10,K1,M0
M0
(3) Setting parameters
Parameters for the head module can be set using software, GX Works2. Creating parameter setting programs is
not required. ( Page 53, CHAPTER 7)
Device
1234
H
Head module
Intelligent
function module
Buffer memory
1234
H
CHAPTER 1 HEAD MODULE
17
1