Appendix 2 Remote Operation - Mitsubishi Electric MELSEC-L SSCNETIII/H User Manual

Appendix 2
Remote operation (RUN, STOP, and RESET operations) can be performed from GX Works2 to the head module.
The remote operation can be performed only from GX Works2 directly connected to the head module with a USB cable.
The remote operation cannot be performed via the network connection.
Remote Operation
1.
2.
3.
• RUN: Sets the head module to the RUN mode. The communication with the
Motion controller continues when it is possible and the link devices are
refreshed.
• STOP: Sets the head module to the STOP mode. The communication with
the Motion controller continues when it is possible. However, the link devices
are not refreshed.
• RESET: Resets the head module. This operation can be selected only when
a parameter for which "Remote Reset" is set to "Allow" in "PLC System" of
PLC Parameter has been written. However, remote reset is not allowed with
parameter. Or remote reset is allowed with parameter, but the head module
is in the RUN status.
4.
Connect GX Works2 to the head module.
Display the "Remote Operation" window from the
menu of GX Works2.
[Online]  [Remote Operation...]
Select a remote operation to the head module in
"Operation".
Click the button to perform the remote
operation.
APPENDICES
A
105