Term - Mitsubishi Electric MELSEC-L SSCNETIII/H User Manual

Unless otherwise specified, this manual uses the following terms.

Term

Buffer memory
Cyclic transmission
Data link
Dedicated instruction
Device
Disconnection
GX Works2
Head module
Intelligent function module
Link device
Link special register (SW)
Link special relay (SB)
Motion controller
MT Developer2
Parameter memory
RAS
Remote input (RX)
Remote output (RY)
Remote register (RWr)
Remote register (RWw)
Return
SSCNET III/H
Transient transmission
TERM
A memory in an intelligent function module, where data (such as setting values and monitoring values) are stored
A function by which data are periodically exchanged among stations on the same network using link devices (RX, RY,
RWw, and RWr)
A generic term for cyclic transmission and transient transmission
An instruction that simplifies programming for using functions of intelligent function modules
A device (X, Y, W, or others) in a head module
A process of stopping data link if a data link error occurs
The product name of the software package for the MELSEC programmable controllers
The abbreviation for the LJ72MS15 SSCNET III/H head module
A module that has functions other than input and output, such as an A/D converter module and D/A converter module
A device (RX, RY, RWr, or RWw) in a head module
Word data that indicates the operating status and data link status of a head module
Bit data that indicates the operating status and data link status of a head module
A generic term for the Q173DSCPU/Q172DSCPU Motion CPU module and Q170MSCPU Motion controller
The product name of the MELSOFT programming software package for the Motion controllers
A flash ROM in a head module, where the parameters of the head module are stored
The abbreviation for Reliability, Availability, and Serviceability. This term refers to usability of automated equipment.
Bit data input from a head module to a Motion controller
Bit data output from a Motion controller to a head module
Word data input from a head module to a Motion controller
Word data output from a Motion controller to a head module
A process of restarting data link when a station recovers from an error
One of the high-speed synchronous networks between a Motion controller and a servo amplifier
A function that enables a Motion controller to access a head module by using dedicated instructions
Description
13