Plc Parameters - Mitsubishi Electric MELSEC-L SSCNETIII/H User Manual

7.1

PLC Parameters

This section describes the setting screens and the descriptions of PLC parameters.
Setting screen
Communication Head
Set the operation mode of the head module.
Setting
PLC Name Set the label and comment of the head module.
PLC System Set parameters for a system including the head module.
PLC RAS Set parameters for the RAS function.
Set parameters to transfer data stored in the following head module
devices as cyclic data.
• Link special relay (SB)
Operation Setting • Link special register (SW)
• Special relay (SM)
• Special register (SD)
• Link register (W)
I/O Assignment Set connection status of each module.
*1 Parameter numbers are used to identify a location where a parameter error has occurred.
54
Description
*1
Parameter No.
01F0H Page 55, Section 7.1 (1)
0000H, 0001H Page 56, Section 7.1 (2)
1002H Page 57, Section 7.1 (3)
300AH Page 58, Section 7.1 (4)
500FH Page 59, Section 7.1 (5)
0400H,
0403H to 0405H, Page 63, Section 7.1 (6)
0409H
Reference