Changing The Supervisor Password - Welch Allyn AED 10 User Manual

48 Programming
2. Press the Next soft key to select different mode.
3. Highlight Save by pressing Enter after the desired selection has been made. Press
the Enter soft key again to confirm the change and return to the Supervisor Menu.
4. To leave the selection as it was originally, press Next when the Save box is
highlighted to select the Cancel box. Press the Enter soft key to return to the
Supervisor Menu.

Changing the Supervisor Password

Access to the Supervisor Menu is protected by a password. The supervisor can change
this password.
Change Code
000
Save
Cancel
To change the supervisor password
1. While in the Supervisor Menu, press the Next soft key to highlight Change Code,
then press the Enter soft key to go to the Change Code Menu.
2. Enter the desired new Password by using Next to scroll to the appropriate number
and use Enter to shift to the next digit. After the third number has been selected,
highlight Save by pressing Enter.
3. Press Enter again while in the Save box to save the new password.
4. To exit the Change Code prompt without changing the password, press Next when
the Save box is highlighted to select the Cancel box. Press the Enter soft key to
return to the Supervisor Menu.
Change Code
321
Save
Cancel
Welch Allyn AED 10 Automatic External Defibrillator