Adjusting The Volume - Welch Allyn AED 10 User Manual

38 Programming

Adjusting the Volume

The volume of the voice prompts through the Welch Allyn AED 10 speaker can be
adjusted. There are three preset volume levels available. Use the volume screen and the
menu selection button below the menu bar to change the volume of the voice prompts.
Main Menu
Volume
Contrast
Date
Time
Log
Supervisor
To adjust the volume
1. Access the Main Menu. Select Volume to display the Volume Menu.
2. Press the Next soft key to change the volume level. As sound volume values are
selected, the sound volume will change immediately and a "Beep" sound will be
heard.
3. Highlight Save by pressing Enter after the desired volume level has been selected.
Press the Enter soft key again to confirm the change and return to Main Menu.
4. To leave the volume at its original level, press Next when the Save box is highlighted
to select the Cancel box. Press the Enter soft key to return to the Main Menu.
Volume Volume
1 2
Save Save
Cancel Cancel
Welch Allyn AED 10 Automatic External Defibrillator
Volume
2
Save
Cancel