Changing Sample Rate (High-Fidelity Sd Card Only); Changing Duration - Welch Allyn Hillrom H12+ User Manual

CONFIGURING THE RECORDER

Changing Sample Rate (High-Fidelity SD card only)

The sample rate is selectable only when using the High-Fidelity SD card which can be set to 1000 or 180
samples per second.
From the CONFIGURE menu, scroll to SAMPLE RATE, press Enter. Scroll to the sample rate desired;
press the Enter key to select and return to the SAMPLE RATE menu. Scroll to DONE, press Enter.

Changing Duration

Duration is used to select recording duration in hour intervals. The maximum selectable recording
duration of 24 hours or 48 hours is a feature of the SD card being used.
From the CONFIGURE menu, scroll to DURATION, press Enter. Scroll to select the desired duration in
hours as value of 1 to 48 or 1 to 24 as dependent on the SD card being used; press the Enter key to
select and return to the DURATION menu. Scroll to DONE, press Enter.
38