Controls - Welch Allyn AED 10 User Manual

User Manual
defibrillation pads connector
menu selection soft keys

Controls

The Welch Allyn AED 10 is designed for ease of operation. After putting the defibrillator
pads on the patient and connecting them to the Welch Allyn AED 10 unit, the operator
performs this simple three-step process:
1. Turn the power ON.
2. Follow text and voice prompts.
3. If prompted, deliver shock by pressing the flashing red Shock button.
Power ON/OFF
Shock
Menu selection
display
1
power on
2
text and voice prompts
3
shock
AED10
Green ON/OFF button to toggle system power on/off
Red Shock button to discharge defibrillator; red LED flashes
when defibrillator is fully charged
Two soft buttons located to the left of the display;
programmable functionality to make menu selections in
programming mode.
speaker
system status indicator
on/off button
shock button
infrared data port
AED10
Introduction 13